Teledyne CombiFlash RF+ PurIon Purlon UV Flash Chromatography System Pred Lumen - AV

Here is a Teledyne CombiFlash RF+ PurIon UV Flash Chromatography System Pred Lumen

Model RF+ PURION UV W/ MS

Predecessor to:
CombiFlash Rf+ Lumen

Condition:
This Teledyne CombiFlash RF+ PurIon UV Flash Chromatography system is in good working order.

Please see the exact video and photos below.

The testing we performed:
The Teledyne CombiFlash RF+ PurIon UV Flash Chromatography system passed all tests and was found to be fully functional:
Power: PASSED
Touch Screen: PASSED
Prime: PASSED
Column Detection: PASSED
Tube Rack Detection: PASSED
UV Detection of Sodium Iodide: PASSED
Arm Movement: PASSED
Waste/Source level sensing: PASSED
Gradient test: PASSED

The Teledyne CombiFlash PurIon Mass Spectrometer passed all tests and was found to be fully functional:
Tested power on and initialization: PASSED
Tested communication with software: PASSED
Tested turbo functionality : PASSED
Tested Operation mode with live readings: PASSED
Tested carrier pump: PASSED
Tested splitter valve: PASSED
Ran test with caffeine in methanol: PASSED (All peaks detected with little to no noise)

The testing performed on this Teledyne CombiFlash RF+ PurIon UV Flash Chromatography system noted above confirms that this item is operating as designed from start to finish.
With this testing, you can purchase with confidence this Teledyne CombiFlash RF+ PurIon UV Flash Chromatography system is ready to go.
"Ready to go" means this item is in stock as described below and is already tested as described above, so there is little to no lead time before shipping.
You will not have to wait for us to source the equipment because we have it tested and available for shipping.

The system consists of:
Teledyne CombiFlash RF+ PurIon Flash Chromatography System
Teledyne CombiFlash PurIon Mass Spectrometer
Edwards E1M18 Vacuum Pump
(4) Intake Hoses w/ Caps and Weighted Filters
Set of Waste Hoses
4-liter Waste Bottle Cap
16x 150/160mm, 18ml rack
Column bypass tube
Standard Power Cord

*Note, Glassware, test tubes, and column not included*

You can purchase additional/different size racks from for around $253.00.

Configuration and Setup:
(CombiFlash RF+)
Channels: 1 channels
Flow Rate: 5 to 200 ml/min
Number of Solvents: 4 solvents
Max Pressure: 200 psi
Detector Wavelength: 200-360nm

Dimensions: 61 x 36 x 43cm (L x W x H)
Weight: 24.5kg
Power requirements: 100-240VAC 50/60Hz 2Amp max

(PurIon Mass Spectrometer)
Mass Range: 50 to 1200 Dalton
Resolution: 1 Dalton
Ion Source: ESI (Electrospray Ionization)
Software: PeakTrak
Ionization mode; Positive or negative
SIM Sensitivity: 10 pg Reserpine, 100:1 S/N (RMS) with SIM of m/z

Dimensions (H x W x D)
Mass Spectrometer: 26 x 11 x 22 in (66 x 28 x 56 cm)
Roughing Pump: 10 x 9 x 18 in (26 x 23 x 46 cm)

Video Description:
The video gives an overview of the Teledyne CombiFlash RF+ PurIon UV Flash Chromatography system, and also performs functionality.

Documentation:
Quick Start Guide: Teledyne CombiFlash RF+ UV Flash Chromatography

Brochure: Teledyne CombiFlash RF+ UV Flash Chromatography

Manual: Teledyne CombiFlash RF+ UV Flash Chromatography

This will ship via freight. Please contact us with your zip code to obtain shipping quote.

Please do not hesitate to contact us if you have any questions.